What We Hold on Your Parts
Every number above is what we hold on your parts — CMM-verified, with free FAI on your first order.
| Tolerance | ±0.01 mm general, ±0.005 mm on critical features |
| Surface finish | Ra 0.8–3.2 μm (5-axis contour finishing to Ra 0.8) |
| Machines | 3-axis VMC and 5-axis machining centers |
| Parts | Plates, housings, valve blocks, brackets, impellers, molds |
| Materials | Aluminum, stainless, titanium, copper alloys, engineering plastics |
| Batch | 1–5,000+ (prototype to production) |
| Inspection | CMM, FAI report with measured values |
From our historical RFQ data, around 70% of incoming part requests fall within 1–100 pieces. We support both prototype batches and volume production with no minimum-order requirement. Submit your drawing for feasibility evaluation.
Frequently Asked Questions
What tolerance can CNC milling hold?
±0.01 mm as general, ±0.005 mm on carefully set up critical features. Positions and contours are verified on the CMM.
When do I need 5-axis instead of 3-axis?
When features exist on multiple faces and compound angles — 5-axis machines them in one setup, eliminating re-clamping error and extra fixture cost.
Can you mill thin walls without deflection?
Yes, with controlled tool paths and workholding; we flag unstable geometry in DFM feedback before quoting.
What materials do you mill?
Aluminum 6061/7075, stainless 303/304/316, titanium, brass/copper, PEEK/POM/ABS — all with CMM-verified tolerances.
Do you do small-batch milling?
Yes, no MOQ. Single prototypes, pilot runs and production quantities, with free FAI on every new part.
Have a Similar Part in Mind?
Send us your drawing — we review within 48h and return a quote with lead time.
Get a Quote →