What We Hold on Your Parts
Every number above is what we hold on your parts — CMM-verified, with free FAI on your first order.
| Tolerance | ±0.005 mm on critical diameters |
| Surface finish | Ra 0.8–1.6 μm (grinding to Ra 0.4) |
| Size range | Prototype to production — send your drawing for a machine-envelope check |
| Materials | Aluminum 6061/7075, stainless 303/304/316, Ti-6Al-4V, brass, PEEK/POM |
| Equipment | CNC turning centers, turn-mill, Swiss-type |
| Batch | 1–10,000+ (prototype to production) |
| Inspection | CMM, FAI report with measured values |
From our historical RFQ data, around 70% of incoming part requests fall within 1–100 pieces. We support both prototype batches and volume production with no minimum-order requirement. Submit your drawing for feasibility evaluation.
Frequently Asked Questions
What tolerance can CNC turning hold on diameters?
±0.005 mm on critical diameters, verified on a CMM with full report. General dimensions run at ±0.05–0.1 mm unless specified.
When should I choose turn-mill instead of turning?
Parts with rotation plus off-axis features — cross holes, keyways, milled flats — are done in one setup on a turn-mill, avoiding transfer error between machines.
Can you machine thin-wall bushings without distortion?
Yes. Thin-wall parts use controlled clamping and finishing passes so roundness holds within specification — CMM report included.
How does batch size affect turning price?
Setup and programming dominate small batches; from 50 pieces the unit price drops 40–60% as setup cost spreads. No MOQ.
What surface finish is standard after turning?
Ra 0.8–1.6 μm as standard; grinding reaches Ra 0.4 μm where required.
Have a Similar Part in Mind?
Send us your drawing — we review within 48h and return a quote with lead time.
Get a Quote →